Discuss Help! Sealing a waste pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Thanks for all your advice here :)
Starting my shopping list with bath waste. Which sealant would you recommend? I take it would be different to the one I sealed my floor with.

I use good quality sanitary silicone sealant, Nemesis, Dow 781, Everflex 500 white or clear, you'll need paper nearby at least or ideally Wonder/Soudal/Tygis Wipes.

Make sure you make a good CONTINUOUS bead around both sides of the fitting, not too much and not to little - any gap and the water WILL get through.

ATB.
 
I use good quality sanitary silicone sealant, Nemesis, Dow 781, Everflex 500 white or clear, you'll need paper nearby at least or ideally Wonder/Soudal/Tygis Wipes.

Make sure you make a good CONTINUOUS bead around both sides of the fitting, not too much and not to little - any gap and the water WILL get through.

ATB.
Thanks Jim! Got myself some Everflex and will tackle it later on. You guys have been invaluable.
 
Sorry to disagree with my esteemed colleagues.

I would NOT use silicone. Use Plumbers Mait.

It does not rely on 'solidifying' so is far more flexible than silicone and accommodates far more movement through temp variation because it 'self heals'.
 
Sorry to disagree with my esteemed colleagues.

I would NOT use silicone. Use Plumbers Mait.

It does not rely on 'solidifying' so is far more flexible than silicone and accommodates far more movement through temp variation because it 'self heals'.
Showing your age there mate. :D:D The problem is most instructions for wastes now state to use silicone.
 
Showing your age there mate. :D:D The problem is most instructions for wastes now state to use silicone.

You know W, I don't care :rolleyes: Oddly, what has always truly driven me is to do the best job I can under the circumstances. All too often silicone can be slightly old or the surfaces slightly contaminated. With Plumbers mate neither of those things matter a jot. I never once had a call back for a waste I'd PM'd in but had a couple that were siliconed. One three times before I discovered it was contaminated and had to be chemically cleaned before the bl00dy silicone would seal to both surfaces. Never again :D
 

Reply to Help! Sealing a waste pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down...
Replies
2
Views
171
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
238
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
319
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
303
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
288

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock