- Messages
- 34,368
- Solutions
- 2
1/2 for one to two rads any more need a drop each
Discuss help needed on pipe sizes etc in the Plumbing Jobs | The Job-board area at PlumbersForums.net
As shaun says no more than 2 rads on one set of 15mm drops what sort of fittings are you using on the pipe ?
Hi going to try get someone in. The problem is the few plumbers I do know /tryed are to busy or don't even answer the phoneMaybe you should offer to pay someone to do a proper pipe design for you.
Or maybe you should go to a supplier that offers to do a pipe design for you if you buy their equipment.
It's obvious that you have no experience in designing a heating system and you want someone to design it for you - for free.
You want to install it yourself --- what's in it for anyone that offers you help?
I hope the free advice you get - you will be able to litigate against someone if it all goes wrong.
There's more to designing a heating system than assuming 22mm mains and 15mm drops - even if they can be split into 2.
This is a Plumbers Forum - not a free heating / hydraulics design forum.
There's plenty of experience here & most offer it for nothing.
If your lucks up, you will get someone to size, design and virtually install your system for you.
All the best
Maybe you should offer to pay someone to do a proper pipe design for you.
Or maybe you should go to a supplier that offers to do a pipe design for you if you buy their equipment.
It's obvious that you have no experience in designing a heating system and you want someone to design it for you - for free.
You want to install it yourself --- what's in it for anyone that offers you help?
I hope the free advice you get - you will be able to litigate against someone if it all goes wrong.
There's more to designing a heating system than assuming 22mm mains and 15mm drops - even if they can be split into 2.
This is a Plumbers Forum - not a free heating / hydraulics design forum.
There's plenty of experience here & most offer it for nothing.
If your lucks up, you will get someone to size, design and virtually install your system for you.
All the best
Its gone mad here the last year or so the boom is backA full heating system is too small a job?
Reply to help needed on pipe sizes etc in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.