Search the forum,

Heating / hotwater controller replacement

Post new thread

Discuss Heating / hotwater controller replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

howy1

Messages
60
Hello all , can you recommend a simple to use and reasonably priced controller for a Y plan system please , friend has an antiquated one that needs replacing ( cant see the make)
cheers Howy
 
Drayton lifestyle
 
howy1 said:
Hello all , can you recommend a simple to use and reasonably priced controller for a Y plan system please , friend has an antiquated one that needs replacing ( cant see the make)
cheers Howy
Click to expand...
Hi howy,

You could install a Honeywell controler
 
Status
Not open for further replies.

Reply to Heating / hotwater controller replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
317
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
165
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
236
PSxxxxxx
P
K
Running copper pipework above / across a Gas boiler?
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
172
kristeva
K
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
260
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum UK
Tile News
Tilers Forums UK
Electrical Forum
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock