Search the forum,

Hansgrohe I box bath/shower mixer

Post new thread

Discuss Hansgrohe I box bath/shower mixer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

scrivtech

Fitting one these and need help!! There's reducers to be made in then do I use male irons? Also tappings for 22 and it's 15 from combi do I take 22 to bath. 15 into to mixer work? Thanks
 
Yes mate screw those bushes in and a male iron into them to accept the 15mm pipework, great shower choice!
 
as said above, 15mm feeds for hot and cold then 22mm male iron and take 22mm to the bath then 15mm to the wall outlet. refrain from using compression joints behind the wall if you can help if for the wall outlet. i like to always use soldered wingbacks then you know theres no chance of it moving/loosening the compression joints when you screw the wall outlet in (ive seen this happen on numerous occasions) but its a very good quality shower choice
 
Status
Not open for further replies.

Reply to Hansgrohe I box bath/shower mixer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
U
Below Ground Soil Pipes on Self Build Bungalow
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down through slab and out through deadwork into a manhole. I will work out falls from manhole and set the height of the waste water system as required. For...
Replies
2
Views
134
umiq88
U
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilezine Tiling News Tile Association
DIY Forum
Tilers Talk
Electrical Advice
Tile News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock