Search the forum,

Discuss FlexiSure Comp-Connector in Smaller Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

Lorfy

Does anyone know if you can get the below product in either 100mm or 200mm lengths. All the majors only seem to stock it in 300mm and 500m.

[DLMURL="http://www.diy.com/nav/fix/plumbing/plumbing-supplies/plumbing_fittings/-specificproducttype-connectors/PlumbSure-Flexi-Comp-Connector-15-x-15-x-500mm-11478193"]PlumbSure Flexi Comp Connector 15 x 15 x 500mm, 0000005272273[/DLMURL]

It is a female to female 15mm i'm after but 300mm is still a little too long.

Any known gems or specialists would be much appreciated.

Cheers

Cris
 
Last edited by a moderator:
do it in copper, do it in copper, do it in copper..

orrrrrrrrrrrrrrrrrr......

Speedfit 1/2"bspx15mm flexible hose 150mm

fit a 15mm compression coupler onto the tap connector side of this to make it pushfit to compression - which will work in whatever circumstance you're trying to use compression x compression for.
 
Do it properly in copper, not a hose. It's only a short section. Round 2 of copper v's flexi coming up......
 
Status
Not open for further replies.

Reply to FlexiSure Comp-Connector in Smaller Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Useful
Hi - apologies for the stupid question but really struggling to find the right answer (I'm a novice as you'll see). New kitchen tap fitted with 2 flexible tap connectors. The ends (which connect to the incoming pipework) have a diameter of 22mm and have female connections. I need to connect...
Replies
7
Views
11K
  • Locked
Hello, I have very little knowledge of plumbing and I stupidly bought a Grohe mixer tap from Amazon to replace an existing bathroom tap, link is here: https://www.amazon.co.uk/gp/product/B00WBIH962/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 The flexi hoses it comes with are of a size that...
Replies
11
Views
29K
J
  • Locked
I Have some kitchen taps that were supplied with flexi tap connectors. The size of these are 12mm end to tap and 12mm female thread end to supply. Unfortunately the rubber washers in the female thread end have disappeared! where can i get replacements please?? most plumbing suppliers only seem...
Replies
6
Views
990
D
  • Locked
Hi there, plumbing newbie here. I'm trying to replace a malfunctioning fill valve, and I've hit a bit of a problem, and wanted some thoughts from the experts here as to how to proceed. I've replaced the old valve assembly with a Fluidmaster 747UK side entry fill valve. The old valve assembly...
Replies
4
Views
3K
M
  • Locked
http://www.****************/shop/Plumbing/Flexible+Connectors/Flexible+Tap+Connector+with+Isolating+Valve+15mm+x+12+10mm+Bore+300mm/d20/sd2807/p77655 In the above link it shows a FTC for 15mm pipe, but which size do i need to connect onto a bathroom sink ? is it 1/2" or 3/4" ? I also want to...
Replies
7
Views
5K
Guest123
G
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock