Discuss FlexiSure Comp-Connector in Smaller Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

Lorfy

Does anyone know if you can get the below product in either 100mm or 200mm lengths. All the majors only seem to stock it in 300mm and 500m.

[DLMURL="http://www.diy.com/nav/fix/plumbing/plumbing-supplies/plumbing_fittings/-specificproducttype-connectors/PlumbSure-Flexi-Comp-Connector-15-x-15-x-500mm-11478193"]PlumbSure Flexi Comp Connector 15 x 15 x 500mm, 0000005272273[/DLMURL]

It is a female to female 15mm i'm after but 300mm is still a little too long.

Any known gems or specialists would be much appreciated.

Cheers

Cris
 
Last edited by a moderator:
do it in copper, do it in copper, do it in copper..

orrrrrrrrrrrrrrrrrr......

Speedfit 1/2"bspx15mm flexible hose 150mm

fit a 15mm compression coupler onto the tap connector side of this to make it pushfit to compression - which will work in whatever circumstance you're trying to use compression x compression for.
 
Do it properly in copper, not a hose. It's only a short section. Round 2 of copper v's flexi coming up......
 
Status
Not open for further replies.

Reply to FlexiSure Comp-Connector in Smaller Sizes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Useful
Hi - apologies for the stupid question but really struggling to find the right answer (I'm a novice as you'll see). New kitchen tap fitted with...
Replies
7
Views
11K
J
  • Locked
I Have some kitchen taps that were supplied with flexi tap connectors. The size of these are 12mm end to tap and 12mm female thread end to supply...
Replies
6
Views
994
H
  • Locked
Hi folks, apologies if this is a simple question. I have fitted myself a bath before and somehow I luckily ended up getting the right bits and...
Replies
4
Views
19K
honeymonster
H
Back
Top