Blocked Flue Vents Solid Fuel Boiler (Trianco TRG45)

[dom_trig]

Hi,

Was wondering if anyone might have any tips how to get the rock solid soot build up cleared from the flue vents in my Trianco TRG45. They are not completely blocked and have sufficient airflow for the boiler to run but cannot get the flue vent cleaner tooldown the vents. I think this is due to hardened soot that i have tried brushing, chiselling etc. The main difficulty is the access. Has anyone had any experience with anthracite boilers?

Many thanks in advance

Dom

 

[Simon Richardson]

Hi,

Was wondering if anyone might have any tips how to get the rock solid soot build up cleared from the flue vents in my Trianco TRG45. They are not completely blocked and have sufficient airflow for the boiler to run but cannot get the flue vent cleaner tooldown the vents. I think this is due to hardened soot that i have tried brushing, chiselling etc. The main difficulty is the access. Has anyone had any experience with anthracite boilers?

Many thanks in advance

Dom

Hi we have same problem as you did, did you manage to resolve it? Any tips would be gratefully received!

 

[Harvest Fields]

Is this a double post???

 

[ShaunCorbs]

Is this a double post???

No original thread is from 2011 and op has posted in here as well

 

[Harvest Fields]

No original thread is from 2011 and op has posted in here as well

Sorry. Just woke up and didn't scroll back that far? My bad.

 

[Simon Richardson]

Hi no double post, same problem and wondered if earlier person had had any success?