Search the forum,

Basin tap 3 tap hole mixer

Post new thread

Discuss Basin tap 3 tap hole mixer in the USA area at PlumbersForums.net

O

oliver…

Messages
1
879748E6-8234-465A-B9AE-68F27EC0EAE2.jpeg
Does anyone know where I can get one of these or even know what there called typed in every flexi tap connector I can think of but nothing’s like this mixer style
 

Attachments

  • 74AA2606-9EC1-4431-A446-AAEAC445FD08.jpeg
    74AA2606-9EC1-4431-A446-AAEAC445FD08.jpeg
    326.7 KB · Views: 14
  • 367E51DE-0C8A-40CD-BE4B-17D1D813A505.jpeg
    367E51DE-0C8A-40CD-BE4B-17D1D813A505.jpeg
    271.6 KB · Views: 13
1. Its not a standard part, but proprietary to the tap maker.
2. Unless you know the make and model of the tap I don't believe you will find it.
3. Even if you do find the make and model, unless it is a well known make, you probably can't get spares for it.
4. If it were me I'd replace the taps.
 

Reply to Basin tap 3 tap hole mixer in the USA area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Lou
Lou
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
195
ShaunCorbs
ShaunCorbs
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
317
Timmy D
T
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
191
Thomas J Marshall
T
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock