Discuss Leak from Vaillant TurboMax Plus 837E pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
I have a Vaillant TurboMax Plus 837E & it's leaking from the connection to the pump, I have attached photos. Does anyone know how to fix it?

Here are the images: Imgur

It s leaking from the copper pipe connected to the pump.
 
very common auto air vent has failed
 
I run the risk of being told I'm wrong, but in my opinion you will need to be Gas safe registered to have any advice here.

if im not mistaken thats the one with the plastic fold down flap with a sep combustion chamber
 
It is , but depending on your point of view the case has been removed

case is still inplace

hqdefault.jpg
 
Yes I agree , but I bet gas Safe wouldn’t lol

They do there's a tb out what homeowners can do

Aslong as they have a seal like the baxi 105 has eg case doesn't form the seal they can do what they like on the wet side aslong as they don't take the seal off
 
They do there's a tb out what homeowners can do

Aslong as they have a seal like the baxi 105 has eg case doesn't form the seal they can do what they like on the wet side aslong as they don't take the seal off
So as long as the op knew this In the first place, and any others that care to follow suit, (as long as they don't make a mistake and open the wrong boiler case, or mix up which one they thought was there's, because they may have looked at a PDF and got confused by the GC number), it shouldn't really be a problem then. ?
 
So as long as the op knew this In the first place, and any others that care to follow suit, (as long as they don't make a mistake and open the wrong boiler case, or mix up which one they thought was there's, because they may have looked at a PDF and got confused by the GC number), it shouldn't really be a problem then. ?

correct normally fixed on with no screws or plastic ones thats how you can normally tell theres a secondary seal/cover

if that makes sense

https://www.User PlumbersForums.net...legally-work-on-a-gas-appliance-factsheet.pdf
 

Reply to Leak from Vaillant TurboMax Plus 837E pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Locked
Hi all We have a Vaillant turbomax plus 828e combi which we found powered off a few days ago. Turns out the 2a glass fuse on the PCB had gone...
Replies
1
Views
388
hi all, i need help to fix the leak from a pipe connected to the water pump via flexi pipe and it is feed from the immersion heater. I have...
Replies
0
Views
408
I have a Vaillant eco plus 837, year installed 2008. It works well. We have one large zone for the house with 13 rads running off it. We also...
Replies
1
Views
335
We have a three zone heating system plus water cylinder (OSO Super S 250L) on an Valliant EcoTec 637. Two CH zones and a UFH zone. Boiler is...
Replies
3
Views
260
Hi, I have a TURBOMax Plus 828E in a small Annex that only has 3 Rads. The boiler Cycles but is only ignited for about 30-40 seconds before...
Replies
0
Views
718
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock