Search the forum,

Discuss Washing Machine & Dish Washer. Do they need Check Valves? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

wild nomad

Hi there,

Need to install a washing machine & dishwasher. Do they have there own integral check valves or do I need to add them?

Thanks in advance :)
 
No you dont.

Dishwashers dont back fill because they have a siphonic tank that has an air gap.

washers have a built in air gap.

Fixed maybe 15 to 20 000 of the bstards years ago fot hotpoint and brut'ish gas
 
Last edited by a moderator:
Sorry you were too quick before I realised my fat fingered typing mistake

Read above
 
Last edited by a moderator:
If its in a very low pressure area.
If you pull the gause filter out of the solenoid inlet / hose connector.
Get a pair of long nose pliers and if you look carefully inside. There is a rubber o ring restrictor.

Just pull it out to improve things.
Good pressure = no need
 
Status
Not open for further replies.

Reply to Washing Machine & Dish Washer. Do they need Check Valves? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
260
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
495
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
242
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
163
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock