Search the forum,

Discuss Tank works but no hot water coming theough in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Salbs

My tank is heating water up but it's not coming through to taps or showers. It started as just the kitchen tap but now it's all of them. Any ideas? Thanks
 
if you have a tank in the loft then chances are there's a problem with the ball valve ... first thoughts ... Do you have any tanks in the loft? Do you know if your cylinder 'tank' is vented or unvented?
 
My tanks under the stairs (live in an apartment) not had any work done. My husband thinks it's the blending valve??
 
I think it's unvented but nit entirely sure, how could I check?!
 
Take some photos and post on here.

Why do you think it's a blending valve?
 
Also to clairfy do you mean no water is coming out of the taps at all or just no heated water is coming out?
 
Status
Not open for further replies.

Reply to Tank works but no hot water coming theough in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
180
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
397
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
353
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock