K
Kbh1984
Hi all, I'm really after some advice with regards to some work I have had carried out in my kitchen, basically having new kitchen fitted and needed some pipes moved to accommodate new kitchen. So outside tap which was on its own stopcock has been removed and outside tap has now been put into main water supply but only way off isolating it is to turn off the mains water. Basically before tap could be isolated on its own now it can't. I've been reading up on this and can't get a straight answer as to me it doesn't comply with regs as no isolation valve or double stop valve. Builder says that because its an alteration doesn't need to comply. But my argument is that it's all new pipe work therefore you haven't altered any off the old pipework. And before I could isolate the outside tap and now I cannot unless I isolate all water at the main isolation valve. Any advice would be greatly received.
Many Thanks
kbh1984
Many Thanks
kbh1984