Discuss New Vaillant flues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

wattsie1987

Plumbers Arms member
Plumber
Gas Engineer
Messages
379
Whats everyone else's opinion on the new Vaillant flue? I think it's total pap the terminal looks like a dog muzzle and not being able to fit the external collar after fitting the flue is a right pain. I've been told that the plume kit bow needs 45ing back to Wall because the terminal sticks out so far.Other than possibly trying to prevent water ingress can't see why they've done it. There no seam on the outer flue which is a plus but other than that it's terrible.
 
So you can't make good the flue hole?

Not really unless you fit the flue long so the collar can be pulled forward made good then be pushed back.( I hate flues that aren't perfect length) Not read MI's yet Haha but just seems stupid!
 
You unclip the original terminal and clip the plume kit terminal in. The original flue needs to be the correct distance off the wall within reason. If it sticks too far out you will need 45s to bring it closer to the wall. Ive never had a problem with them.
 
You unclip the original terminal and clip the plume kit terminal in. The original flue needs to be the correct distance off the wall within reason. If it sticks too far out you will need 45s to bring it closer to the wall. Ive never had a problem with them.
 
You unclip the original terminal and clip the plume kit terminal in. The original flue needs to be the correct distance off the wall within reason. If it sticks too far out you will need 45s to bring it closer to the wall. Ive never had a problem with them.

How do you go about making good the outside mate?
 
The plume kit can be put on an existing flue. Just take the rubber collar off and pop the dimple bits to release the terminal. There should be no making good needed.
 
The only awkward thing is getting the old terminal off the inner duct. A screw driver usually works to prize it off.
 
you got a pic of the flue wats?
 
Status
Not open for further replies.

Reply to New Vaillant flues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

G
Having purchased a new build, the current boiler flue terminates flush at the wall, the vented spent fumes from the boiler flue is within 300mm of...
Replies
4
Views
701
Hi, I have just noticed a damp patch around where my boiler flue exits through to outside wall along with a rusty colour around the collar of the...
Replies
4
Views
1K
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K
We built our detached house 23 yrs ago, having a Vaillant Thermocompact boiler with a Megaflo tank, and it's been excellent. The boiler sits in a...
Replies
6
Views
1K
I am a reluctant LL of a single property, with a boiler on the second floor that needed an internally fitted flue terminal due to height...
Replies
0
Views
771

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock