Need to find horizontal sink waste

[Harryefc]

a hi there if anyone knows where I can get one of these it would be greatly appreciated. I have been to a couple of local plumbing merchants who don't have them and googled for hours. It's for my sink, I have limited room under my sink as I have pull out waste bins underneath. The bins are bigger than they should be ( wrens fault) and now I have the sink fitted I need this horizontal waste like the one in the picture. I can find it anywhere, I found this one but it seems I need to go to Spain to get it. Many thanks Harry

 

[rpm]

Isn`t that one in the photo from a shower rather than a sink?

 

[snowhead]

Isn`t that one in the photo from a shower rather than a sink?

Showers don't normally have a plug...

 

[rpm]

Showers don't normally have a plug...

Good point, just got in, need a coffee I think.

 

[snowhead]

Good point, just got in, need a coffee I think.

Make that 2.

To the O.P;

Ikea is as near as I can find;

[DLMURL="http://www.ikea.com/gb/en/catalog/products/20215523/"]ATLANT Strainer/water-trap f sng bowl sink - IKEA[/DLMURL]

 

[Unregistered]

I have 40mm from the bottom of the waste strainer thingy to the top of the bins, could get an extra 10mm ish of I dropped the bins alittle lower. Would I be able to get an shallow elbow to connect onto the one I have?

cant really make out if that ikea one will do. It's a115mm size, I didn't realise it would be so difficult to find. Last resort is to change the bins but wren arnt the easiest to deal with.

 

[stani]

What about using one of these on a normal shallow outlet
Hepvo Waterless Valve

 

[rpm]

B&Q Chrome Effect Stainless Steel Basket Strainer Waste | Departments | DIY at B&Q

Coffee working now?

 

[stani]

RPM that's the overflow connection on the side,

 

[rpm]

RPM that's the overflow connection on the side,

More coffee, lol then

 

[stani]

Long day I presume?

 

[rpm]

Long day I presume?

Just tiresome customers and heavy traffic feel mentally frazzled.

 

[snowhead]

More coffee, lol then

I did say 2.,..

 

[stani]

Just tiresome customers and heavy traffic feel mentally frazzled.

Know the feeling.

 

[Harryefc]

That hepvo thing might work if the knuckle is shallow enough. I have room at the back of the bins to do whatever as they finish a few inches short of the back of the unit. Can I just get a shallow 90 angle knuckle to connect under, I have 40/50mm to play with. Or at the risk of sounding stupid can I somehow adapt a shallow shower waste?

 

[stani]

Have a look at the hepvo at a merchants they are quite shallow, and shower wastes won't accept a plug, probably won't fit in a sink either. The hep valve is probably about 40 mm overall