Discuss Need to find horizontal sink waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
That hepvo thing might work if the knuckle is shallow enough. I have room at the back of the bins to do whatever as they finish a few inches short of the back of the unit. Can I just get a shallow 90 angle knuckle to connect under, I have 40/50mm to play with. Or at the risk of sounding stupid can I somehow adapt a shallow shower waste?
 
Have a look at the hepvo at a merchants they are quite shallow, and shower wastes won't accept a plug, probably won't fit in a sink either. The hep valve is probably about 40 mm overall
 
Status
Not open for further replies.

Reply to Need to find horizontal sink waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
219
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
224
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
305
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
159
Sonya K
S
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
315

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock