Discuss Is this bath rubber worth buying? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
They work very well actually, ive just finished a sub contracting job where we fitted over 300 bathrooms and the foreman gave us all one of them, they got regular and heavy use and still worked well.
 
Used these before, worked wonders on removing small black marks on china and the like. Found in certain cases adding a touch of soap removed any existance of visable indescrepencies, but genraly this did the job on its own. Well worth having one.
 
Does the job. I also carry a six grades emery board, the ones women use to polish their nails. Great for polishing out a little scratch or dent in baths.
 
Works well. Toolstation also do an enamel repair kit which hides and re-coats scratches and chips in ceramic basins and in baths for about ÂŁ20 and it is money well spent, especially for chipped enamel in steel baths. Kit has enough material for about 5 good size repairs.
 
Last edited by a moderator:
Work well. Toolstation also do an enamel repair kit which hides and re-coats scratches and chipd in ceramic basins and in baths for about ÂŁ20 and it is money well spent, especially for chipped enamel in steel baths.

Thats good to know system, I'm not paying another ÂŁ170 to Plastic Surgeon for a rough repair job that you could still see.
 
jml do something similar for only ÂŁ4.99
[DLMURL="http://www.jmldirect.com/uk/doktor-power/doktor-power-magic-eraser/invt/d03me30100000001/"]"Doktor Power" Doktor Power Magic Eraser at JML Direct[/DLMURL]
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Is this bath rubber worth buying? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down...
Replies
2
Views
171
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
283
PSxxxxxx
P
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
273
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
458
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock