Search the forum,

Help needed! Central heating question

Post new thread

Discuss Help needed! Central heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
forget upsizing the pump, it may have a slight effect but why bodge and bodge? Tee into the main run with 15mm pipe and run to the upstairs TR, and then drop to the downstairs TR. Rebalance the system and then apologise for the inconvenience
 
New posts
Status
Not open for further replies.

Reply to Help needed! Central heating question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
215
SnosRap75
SnosRap75
K
UK Running central heating pipe past electrics?
Hi all I need to run this CH pipework to a radiator located beyond the electric wiring in the image below. Just to be safe I was wondering if there are any rules / distances, etc I need to be following when avoiding the wiring? Many thanks. P
Replies
3
Views
194
Murdoch
M
P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
65
oz-plumber
O
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
164
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
240
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
Tilers Forum
Electrical Advice | Electricians Blog
Contractor Advice Forum
DIY Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock