Search the forum,

Discuss Glowworm Micron 50ff in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jfb

Hello everyone, I have been asked to repair a Glowworm micron 50ff boiler. The boilers reset light is illuminated and the burner indicator light is flashing on the fault finding chart this indcates softwaree problem. The boiler is othwise not working. I suspect the PCB is us. This happened after the customer had her gas meter changed. Has anyone any experience of these boilers that could give an opinion on this
 
Someone else will appear and point you to the correct admin for you to prove your gsr to and be able to ask this in the private gas safe forum.

this cant be answered on the public version.

you are gas safe registered correct?
 
Hello everyone, I have been asked to repair a Glowworm micron 50ff boiler. The boilers reset light is illuminated and the burner indicator light is flashing on the fault finding chart this indcates softwaree problem. The boiler is othwise not working. I suspect the PCB is us. This happened after the customer had her gas meter changed. Has anyone any experience of these boilers that could give an opinion on this
give me your gsr details via pm,answer a few questions once i am satisfied you are gas safe reg,an competent around a gas appliance you can ask this in the private gas safe section,if however you are a john wayne you can rotate sunshine
 
Status
Not open for further replies.

Reply to Glowworm Micron 50ff in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Apologies - I am not a plumber - not sure if it is ok to post here but... It's freezing and my boiler is not working so, I wonder if anyone can offer me advice? I have an old Glowworm Micron 30FF. Must be about 18 years old. The whole system needs replacing if I am honest - the tank it fills...
Replies
1
Views
281
Hi everyone. Had a problem with our boiler last Sunday which is a Gloworm Micron 50FF and probably 25 years old. Flashing sequence of lights indicated that the thermistor had failed which seemed like a pretty easy fix, anyway we called a gas engineer who agreed this was the fault and said he...
Replies
6
Views
897
Hi I have a Glowworm Micron 40FF and it fires up ok but then trips out after a little while with the two LEDs alternately flashing. The thermistor value is ok and the OH stat switch is closed The manual says this is a software sequence error so I thought it was a PCB fault However I have now...
Replies
7
Views
4K
Hi So this morning I was having a shower and suddenly my hot water went completely cold. I jumped out and had a look at my boiler. I noticed that the burner had stopped and the reset button was flashing red. The blue oval shaped light in the middle was on and stable (it was blue). I reset the...
Replies
1
Views
3K
I don't work now due to being ancient. I looked at a 'Range cooker' fired on kero. It had a slow leak that turned into a bad leak in a month! It had a welded fabricated boiler. I've seen such heat exchangers leak within 7 years from new. No wonder the Potterton heating production manager said...
Replies
4
Views
2K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock