Search the forum,

Discuss Gerkros Oil Fired condensing boiler heats water only in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

Lucati

Hi all,

I have a gerkros oil fired, high efficiency condensing boiler with a Riello burner. The issue we have at the moment is that it heats water only when the control panel is set to Hot water only. When we set it to central heating and hot water it won't heat either?
I believe the maker is now out of business and my engineer is struggling to find spare parts. He thinks it may be a control panel issue. Any direction or advice would be very much appreciated.

Cheers
 
Status
Not open for further replies.

Reply to Gerkros Oil Fired condensing boiler heats water only in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the outputs goes to a 2 port diverter prior to the Megaflo (I believe this is some safety feature). I have run into an intermittent problem where some...
Replies
5
Views
245
Hi all, I have a wallstar combi oil fired boiler. We got low on oil a couple of weeks ago but didn't run out. Since we've had our oil delivered the boiler won't fire up when hot taps are turned on so no hot water. The boiler fires up periodically to heat water but not when we turn on taps. I...
Replies
6
Views
632
Hi We have a vented oil-fired heating system with a coal fire back boiler, this is going to be changed to a sealed pressurized system tomorrow and I believe, they are decommissioning the back boiler. I have only discovered today there is no access to the water jacket, so will it be good enough...
Replies
5
Views
534
Hi. I hope some one can help. I have a condensing oil burner and it runs fine but the radiators don't heat. Heats the hot water fine. The pump runs and the thermostat turns the boiler on and off. Thinking it could be a thermistor. All help greatly appreciated.
Replies
1
Views
330
Hi, looking for some advice. We have had an issue with our boiler of late and recently had a 3 port actuator replaced. What’s happening now is when we turn the water and heating on by the control panel the boiler cuts out after a couple of minutes. We opened the valve of the actuator and now...
Replies
4
Views
477
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock