Search the forum,

Discuss Gas engineer/plumber needed SE1 London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

hjm

I am looking for someone to assist with a problem I have at my flat in London.

I have had an Ideal logic 24 in my flat for about 4 years. In the last month or 2 it has started needing the pressure topping up every 2 days. Its under warranty so Ideal came out and replaced the flow turbine, sump, heat exchanger and svalve but without any difference seen. We've not seen any leaks around the radiators in the flat and as the flat is in a very old block it has wood floors with the flat below only separated by that and a plasterboard ceiling. The neighbour downstairs says he can see no signs of water leaking into his flat either which based on the construction and regular topping up I thought we'd see.


Ideal tell me they have done everything on the boiler side that could cause the problem so without signs of a leak I'm struggling to work out the cause.

Looking for someone to assist me further with this problem.
Thanks, Hayden
 
Is the pressure relief valve opened due to expansion vessel failure. It may have opened in the past and not reseated properly. This would be outside, going through the wall
 
Status
Not open for further replies.

Reply to Gas engineer/plumber needed SE1 London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
147
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock