Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Duravit space saving waste and vanity unit in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
3
Hey everyone,

I have a Duravit vanity unit and was recommended to buy the Duravit space saving waste: 005076

1699460127605.png


But im unsure how this connects to the waste pipe in the wall. The plumber has fitted a standard waste, but he had to cut a hole at the back of the vanity. There is another to install and im wondering if there is a way to use the correct space saving waste.

Has anyone ever installed these that could advise please?

Here is a picture of the vanity unit and current waste...
 

Attachments

  • IMG_5985.jpeg
    IMG_5985.jpeg
    48.6 KB · Views: 11
Yes fitted loads they are a bit of a pain , you need one on these - the silver bit is compression fitting with two sizes of rubber inserts. They are mcalpine euro / solvent .
Tbh if you have the cupboard I would go with what your plumber’s done - you only need that silly geberit/Duravit waste kit with some of the drawer units.
 

Attachments

  • IMG_5663.jpeg
    IMG_5663.jpeg
    190.2 KB · Views: 10
Yes fitted loads they are a bit of a pain , you need one on these - the silver bit is compression fitting with two sizes of rubber inserts. They are mcalpine euro / solvent .
Tbh if you have the cupboard I would go with what your plumber’s done - you only need that silly geberit/Duravit waste kit with some of the drawer units.
Thanks Ben, do you have a link for that picture you sent please?
Will this fitting connect the waste pipe in the wall to the Duravit kit (the cigarette box shaped thingy?)
thank you!
 
Thanks Ben, do you have a link for that picture you sent please?
Will this fitting connect the waste pipe in the wall to the Duravit kit (the cigarette box shaped thingy?)
thank you!

 

Reply to Duravit space saving waste and vanity unit in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
566
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
215
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
439
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
235
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock