Search the forum,

Discuss Condensing dryer waste connection in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Does anyone know of any adaptor you can use to fit the waste of these into an appliance trap? Cannot seem to find anything online. There is one but pretty bad reviews.

Thanks
 
About time someone else complained about this.
Somewhere, someone has complained to a manufacturer that a suitable adapter is needed.

I've told numerous builders and home owners to get in contact with the manufacturer / supplier to get an adapter that suits our fittings. If not, you will just have to empty the storage compartment manually.
 
About time someone else complained about this.
Somewhere, someone has complained to a manufacturer that a suitable adapter is needed.

I've told numerous builders and home owners to get in contact with the manufacturer / supplier to get an adapter that suits our fittings. If not, you will just have to empty the storage compartment manually.
Totally agree.
 

Reply to Condensing dryer waste connection in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
285
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
208
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
251
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
261
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock