condense pipe and soil

[buckley plumb]

hi all quoted to fit boiler the problem is the soil stack is 800mm from where boiler is but it is an internal cast iron one that's boxed in the sink is also near but the waste from sink is copper to the cast soil and I cant get to change this to plastic .I can just about remove a small section of boxing at the base of the soil and can get 2 hands in is there anything that will connect if I drill the soil . was thinking soak away but the ground outside is clay and does not drain

 

[stani]

Strap on or clip on boss.

 

[leethegasman]

It's not ideal to go into the copper or cast as it will corrode you can install a neutraliser but you will have to change every 12 months. the best option is a soak away just make bigger or extend to a more suitable place.

 

[stani]

A neutraliser is a least an ongoing replacement with the annual service, put it in all together client should be happy.

 

[tamz]

Mcalpine do bosses for cast.

 

[plumber0808]

Going into the cast or copper shouldn't be much of a issue as it will have the basin and anything else that's on the stack flushing it through.

 

[Mike Jackson]

There's a TB about going into cast. Not a problem if it's below the highest appliance.

 

[PETE 123]

Bigger soakaway with pea shingle and ( lime chippings as normal)

 

[kirkgas]

Cut into the wet section if the cast,

 

[Leo21]

Mcalpine do bosses for cast.

Can you put a link up please Tamz.