Search the forum,

Discuss Changing radiator for 2 verticals in the Central Heating Forum area at PlumbersForums.net

Messages
5
Hi all,
I have a 6 ft x 2 ft double radiator in my 18ft x 13 ft lounge and want to change to 2 vertical radiators to gain space. My heating system is a Worcester Bosch greenstar 30i and I have 6 radiators in the house. My question is should I replace the one by working out the btu output and dividing by two or go by the room size btu divided by two?
 
room heat loss and divide by 1.7 ish
 
Hi all,
I have a 6 ft x 2 ft double radiator in my 18ft x 13 ft lounge and want to change to 2 vertical radiators to gain space. My heating system is a Worcester Bosch greenstar 30i and I have 6 radiators in the house. My question is should I replace the one by working out the btu output and dividing by two or go by the room size btu divided by two?
The modern vertical radiators are usually poor heat emitters. Obviously do your figures but do not be surprised if you end up with two expensive monsters Centralheatkinf
 

Reply to Changing radiator for 2 verticals in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
148
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
192
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock