Search the forum,

boilermate 2000

Post new thread

Discuss boilermate 2000 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

REDSAW

its on a glow worm 18hxi,

they have been out to change a part but say the boiler is wired incorrectly 'code 2'

customers called me out to make a report as their trying to get out of the warrenty!!.

whats this all about, how can a boiler mate - boiler not wired right. it will work or not?

any ideas?
 
Last edited by a moderator:
Re: boiler mate

Pump over run? Should be wired back to the boiler according to instructions but needs to be controlled by the boilermate.
 
seems like it, been doing some research apparently they are not compatible with the boiler as theres no p.o.r.

suposed to be designed and authorised before the two are married together.

is it jjust a case of another switched live to boiler?
 
Last edited by a moderator:
Re: boiler mate

Mike Jackson said:
Pump over run? Should be wired back to the boiler according to instructions but needs to be controlled by the boilermate.
Click to expand...

can you go into it a bit more, how you do that?

looks like g.w are bitching but not stating the details

thanks
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to boilermate 2000 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
oz-plumber
O
Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
168
Lou
Lou
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
mutley racers
M
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Lou
Lou
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Standards BS5389
BS 5389 Tiling Standards
Tile Talk
Tile Blog
Contractor Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock