Search the forum,

Discuss Bathroom pricing question in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
5
Trying to price up for some work for someone, they want shower tray fitted toilet and basin in downstairs bathroom, and upstairs bathroom they want me to tile the shower cubical, fit concealed shower, basin and toilet, is £900 to much? To cheap??
 
Way too cheap I would be that for one inc fittings /tube etc
 
Without seeing it I would say that’s better
 
As in what are they doing ?
 
I'm just looking at receipts on a bathroom I'm nearly done with.
Standard small bathroom about 1.7m x 2m
Adhesive and grout was about £100
Pipe and fittings inc a couple of soil fittings and traps etc and some trim £400
Looking at about 8 days work inc plastering, tiling etc
Should be about 3k with customer paying ontop for suite.
 
If you price it too keenly then you'll be rushing to get done and won't do right by yourself or your customer.
I wouldn't price a job like that all as one, I'd separate the different areas atleast and put in a high estimate (add a day or two).
You can let the customer know what time you think it could take but that you hope it will go much smoother and will reflect that in the bill.
By separating the jobs you can build in twice the contingency and separate your liability should there be any issues.
 

Reply to Bathroom pricing question in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
367
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
221
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
289
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
211
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock