Search the forum,

Discuss Azusa Thermostatic Mixer with Diverter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

P

pitmaxbull

Hi all i have had this shower Triton Azusa Thermostatic Mixer with Diverter for 2 yrs and not been a problem since a few months, it has gradually got colder and has come to the point that what eva the temperature is on the shower it stays the same heat (Luke Warm)Any help appreciated thanks Sean
 
Last edited by a moderator:
Thanks for reply i have checked filters and they are ok, i have also change the diverter valve in boiler as i was told it could be that as one of my radiators was hot when not on, Thats all ok now but didnt change anything with shower. could it be the thermostatic valve in the mixer taps
regards
Sean
 
Hi its Sean again.
Would anyone have an idea what it could be, could it be the thermostat valve in shower ?? Or do i just go out and buy a new one as the shower is getting worse.
regards
Sean
 

Reply to Azusa Thermostatic Mixer with Diverter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
284
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
240
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock