I need help with a kitchen sink drain, we had a new granite counter top and sink installed, I had the sink sent directly to the installers for proper fitting, didn’t realize they where sent the wrong depth sink till after everything was installed, Sink is 9 inch deep not the 6 inch I ordered. My drain inlet is to high now to connect both sides of sink to current drain. I could possibly hook up one side of sink with a very short tail pipe piece, the other side I was wondering if I put a 45 wye in the vertical drain stack in the basement, I could add another drain line up to the other side of the sink and also get a dishwasher wye in for a new dishwasher we want to install along with an AAV required now by MN code.
Discuss Adding kitchen drain in the USA area at PlumbersForums.net
Reply to Adding kitchen drain in the USA area at PlumbersForums.net
Similar plumbing topics
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Hi all,
I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc.
When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-
-
SPorcelanosa KRION Attica screen 1.2m, anyone?
- Started by Sebastian T
- Replies: 0
-
Cistern filling one third of the way
- Started by dwaindigital
- Replies: 4
-
Boiler losing pressure only on central heating- Started by SnosRap75
- Replies: 6
-
tanking. Is it ok to just seal everything with plastic.
- Started by Staggersandfalls
- Replies: 3
-
Pop quiz, does anyone recognise this radiator valve?
- Started by dimuc
- Replies: 4
-
SUsing coil to clear pipe leading to gutter
- Started by Sonya K
- Replies: 2
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-