Search the forum,

Discuss Access to British Standards in the Gas Engineers Forum area at PlumbersForums.net

Messages
6
HI there.

Just wondering if anyone knows whether it's possible to access British Standard documents through BSOL(British Standard Online) at home? If so how much is membership?

If no, then which libraries offer access to these documents? I'm based in London.

It would litereally be several thousand pounds to access all relevant documents needed for domestic and commercial gas engineers.

thanks in advanced
 
As far as I know most Libraries offer online access but only within their premises.
Companies I worked for in the past paid for online access through third party organisations.

IHSTI was the last one I had access to through a company.

Gassafe have a scheme I believe.
 
Just wondering if anyone knows whether it's possible to access British Standard documents through BSOL(British Standard Online) at home? If so how much is membership?

Email BSOL and ask. Contact info here:


If you can narrow down the areas you're interested in you may be able to get a reduced price compared with the 'everything' deal. BSI publications have always been painfully expensive. Fortunately, they are rarely needed for domestic work.
 
You dont have to be a member of BSI group to buy copies of standards, membership typically gives you around 50% discount so unless you're a large corporate entity with tens or hundreds needing access its a lot cheaper to buy one offs.
 
I know its an old thread, we used to have a library here, we all put loads of our Dropbox stuff from BS,s to fault finding , huge amounts it was quite extensive, not sure if its still here,
 
I know its an old thread, we used to have a library here, we all put loads of our Dropbox stuff from BS,s to fault finding , huge amounts it was quite extensive, not sure if its still here,
Probably not because the penalties for violating copyright by publishing material in that manner would be very large if the copyright owners ever learned about it which, as this is an open forum indexed by Google, is fairly likely that that they would.
 

Reply to Access to British Standards in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
192
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
227
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
498
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
243
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
210
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock