Discuss Vitra dual flush toilet constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Bit of advice please. I'm trying to remove and clean the flush valve washer as I suspect it's either worn or needs a clean. (Toilet is not filling and emptying water straight out into the bowl). However, from reading a post on here it appears that I may have to give the unit a 90 degree turn to remove, but it's just not budging. Without wishing to break the unit, am I just being daft and missing something obvious? (Picture attached with the offending catch and there is a second one on the opposite side). Cheers.

20170910_125352.jpg
 
Turn it anti clockwise

It will be stiff but should come out
 
Status
Not open for further replies.

Reply to Vitra dual flush toilet constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

i have 3 sottini toilets with a compact cistern. It has an ideal standard dual flush mechanism. 2" entry The ideal standard is poor quality in...
Replies
8
Views
1K
Hi, I have a dual flush toilet that's leaking water from the cistern to the bowl. I've taken the flush system out cleaned the washer of gunk...
Replies
4
Views
1K
I wonder if anyone is able to help with advice on this. We have fitted a new toilet and 6 litre cistern .. it flushes .. but not as efficiently as...
Replies
14
Views
2K
Hi, new to the group and need advice with my Vitra ts823. The toilet stopped flushing and there is water constantly trickling inside it. I've...
Replies
2
Views
2K
This toilet is constantly running water into the bowl. Am I right in having to remove the valve on the right & change the washer? The one on the...
Replies
5
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock