Search the forum,

Discuss 15mm Gas supply in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sgw869

Hello
I live in Spain and at last we are have gas piped to our urbanization
Question is from the underground supply the installer has run 15mm copper supply pipe
The pipe work has approx 12 soldered bends and the run is approx 10-12 metres
This pipe is supposed to feed four properties
When the pipe reached the central point of the four properties it splits four ways and I can only assume that is where the meters will go.
I am contemplating a 24kw combi boiler, my question is will the 15mm supply pipe be adequate to run one boiler, let alone four in total
Also there is the gas ovens and hobs to add to the equation
I can supply photographs if this would help
Best regards
Sgw
 
it depends what preasure they supply the gas at as to the pipe size im sure there was some one on here who has worked in spain
 
Depends on the pressure. It is usually higher on the inlet to the meter and governed down to working pressure from there.
Best speaking to the guys doing the work.
 
Sounds like you need to get in the pro's, bet the gsr doesnt cover Spain lol
 
It's probably LPG and they may install regulators at he property.
 
Aint got the slightest. Never heard of it 15mm feed upstream to feed four meters and then more appliances I'm loast.
 
Aint got the slightest. Never heard of it 15mm feed upstream to feed four meters and then more appliances I'm loast.

I'll put my money on it being from a comunal lpg bulk store, supply from it medium pressure to the meters and goveners to knock it back down to low pressure.

will have to be a flipping big bulk store for the vapour take off rate to be high enough though?
 
Going back to the original post.

If I lived in Spain I would have solar thermal, with electrical back up ?

Why a combi ?

The suppliers will be supplying gas for cooking/gas fire only ?

Different regs I am sure.

Bearing in mind the country is nearly bankrupt I doubt they are forward planning too much !
 
Hola To you all
Firstly many thanks for all the replies
In Spain at last in our area the supply is going to be piped natural gas
What Tamz has posted..the supply pressure is usually higher to the meter....
Hopefully this will be sufficient and the answer i was hoping for
Combi is my choice 24kw to serve 7 Rads
The Spanish are installing the gas supply...No other choice...
I will then get English engineers to do the rest
I have posted a few photos of the 15mm gas pipe and manifold installation
I would like your views on them
Many thanks
Sgw IMG_4.jpgIMG_6.jpgIMG_9.jpg
 
What's all the damage to the popes in the first pic? Corrosion, burnt?
 
Hi
Its the residue from the soldering, the joints aren't wiped clean
Sgw
 
Status
Not open for further replies.

Reply to 15mm Gas supply in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Im fitting a kitchen in my own house . When removing the gas oven on a bayonet fitting and turned the gas hob off and removed a four burner gas hob. Ive noticed that the oven supply 15mm and the hob supply is 15mm but once the cupboard is out i can see the hob supply is 10mm in the wall. Which...
Replies
5
Views
551
Hi, Non-professional / knowledgeable person here. I'm a Brit in Romania who volunteers for a charity building an old peoples home for needy old people. Out here competence and integrity is harder to come by in a worker, in fact it's hard to find workers at all where we are in the countryside...
Replies
3
Views
389
Hi all, Does anyone have any feedback as to which is best. Running the pipe from the outdoor gas meter to a new boiler on an outside wall or run the pipe under the floor (suspended timber) which is our existing setup and the new boiler is being sited in same location as old. I ask just in...
Replies
15
Views
1K
Hi All, I need your advise as I'm really concerned here. I only just had regular boiler replaced with combi (Vaillant ecoFIT Pure 25kw). I had few surveys done and everyone stated the gas supply pipe from the meter to the boiler must be changed from current 15mm to 22mm. The plumber I used said...
Replies
10
Views
2K
Hi All After having pooling water on my drive, I dug down around to find: Black pipe poly/plastic dug 450mm deep spraying water at mains pressure from small hole/crack The outside of pipe (measured with veneer caliper) at 23.5mm Pipe Runs under drive, along side of property and looks to go...
Replies
3
Views
554
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock