Discuss Combi boiler with rear flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Draw a box 2m below and 600 either side if it's in that box it's a no go

Thanks for that.

In the Vokera Manual I can see the 600mm measurement if to side of a Velux and the 2000mm measurement if below but no indication of the relevant measurement when the flue is not directly to the side nor directly below. It makes sense however to have a measurement for that scenario - I was relying on Vokera Technical who said,

"Yes, that would be fine. As long as the 300mm clearance to the slate is maintained and it is at least 300mm from the velux window ."

Do you happen to have a source to the diagram you describe please?

I'll draw Vokera Technical's attention to your post to see if they have a comment.

Thanks again.
 
You should really get a gs engineer in to spec this do you.
 
cant have the flue protruding by 300mm anyway - unless they've changed it, then no white of flue to be showing.

that cant be accurate!
the flue on the vokera rear extension cannot be cut down less than ''375mm'' i think it is?
that means there will be white showing on non-cavity walls!!
 
Good point chaps. Think it's been decided that the flue can't go where he wants it anyway
 
that cant be accurate!
the flue on the vokera rear extension cannot be cut down less than ''375mm'' i think it is?
that means there will be white showing on non-cavity walls!!
Being told previously by Vokera tech that the white is not uv rated and will rot over time if in sunlight but may have changed.
 
Being told previously by Vokera tech that the white is not uv rated and will rot over time if in sunlight but may have changed.

interesting point. changeable if it lasts 10 years though.lol
 
Status
Not open for further replies.

Reply to Combi boiler with rear flue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Hi everyone. I was hoping someone here might be able to help me with a problem I have. After using our shower for around five minutes it seems to...
Replies
2
Views
746
Billy Boiler
B
Hi, I have just noticed a damp patch around where my boiler flue exits through to outside wall along with a rusty colour around the collar of the...
Replies
4
Views
1K
So I've got a Glow Worm back boiler fronted by a gas fire, at least 15 years old probably a lot more. The water heating makes a row as there is a...
Replies
2
Views
1K
I have a 3 port valve Y plan system, with a hot water tank in airing cupboard and a cold water feeder tank in loft. I want to replace the old 25+...
Replies
13
Views
2K
Not sure what my options are here. Basically a friend of mine recommended his father in law to do our plumbing/gas work for our renovation. First...
Replies
18
Views
2K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock