Discuss How much to fit one of these plus electrics? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Didnt this company sponsor the forum briefly?

Alan Wright on this thread

Cheers Ray thats a bit better explanation, I see it can work of low voltage which yeh is very handy, ash you'd best make sure if only putting one on the hot pipe that there's non returns in place if it's a mixer shower lol ,

What type of shower are u using it for ash, .?
 
Seen larger booster pumps with a series of impeller bowls or chambers so the pressure leaving the last chamber is far greater than the first but to do it on this size and warranty it for 3yrs would take some impressive engineering. Almost tempted to buy one to find out how it works.
 
Sorry I haven't posted back sooner.

The customer wants this pump and he will probably buy it himself as he is scared I might put a bit on to it and the fact that it can be fitted so easily means he thinks the labour costs will be low.

I spoke to the guys at the company who sell them and I was happy with the fact that he knew about plumbing and wasn't just a salesman. Apparently there will be no balancing issues caused when using this.

No flange needed was the information given.

I'm not entirely convinced this will be any good but every successful company had to start out unproven.

Bath Filler Mixer Taps with Shower Curved Designer Chrome SOHO | eBay

This is the shower it is being used on.

I will add feedback for everyone when i have fitted it.
 
Last edited:
Will my opinion do if no professional is available? :p

Well I suppose so! :p

In the time you've been here you've become a professional plumber mate and don't let anyone ever tell you otherwise.
 
Last edited by a moderator:
Exactly. 99% of plumbers don't bother networking and learning like how we do on this forum. Hence why 99% of plumbers aren't as good as they could be.
 
Status
Not open for further replies.

Reply to How much to fit one of these plus electrics? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to swap my electric shower to a power shower. I have a 200 litre pressurised hot water tank in the loft (not a combi boiler) the hot side...
Replies
6
Views
834
A
Hey, here goes and I hope it works.. never used one of these before! I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar...
Replies
1
Views
444
Hi, I am replacing our 11 year old boiler (due to H.Ex. leak) with a new one. This is in a "sealed" system with red expansion vessel in airig...
Replies
3
Views
546
Hi, After years of using a pumped electric shower (Triton t80 pumped), it's now dying and I'd like to replace it with a 'normal' mixer shower...
Replies
1
Views
644
Can anyone help, please? I'm looking for a heating system circulation pump for a domestic install, with 3 speeds, where the speed can be toggled...
Replies
6
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock