Discuss Kohler daryl shower temperature mixer broken in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

salars

Hello
I have a kohler daryl hydra corner column shower system

The hot/cold temperature mixer is broken. There is a tiny stop plug that needs to be pulled out that was not and someone used brut force to get hot water breaking it.

Opening it up I saw the broken part. Been trying to get hold of spares. But no joy as the company that made spares went bust about 3 years ago.

In the midst if all this. The plastic plumbing that connects the supply with reducer (one way valves ?) has started leaking
They seem like push fit connector but pushing them in does not seem to stop the leek. A bit if shaking and they drip again. Any help will be highly appreciated. The plumber that knows out apartment block well is away till te end of the week

Any help will be highly appreciated

u7anatej.jpg
e2emygug.jpg
ry4u4eha.jpg
my5a9a2e.jpg
enede5e9.jpg
7ysa5ena.jpg
 
Wrap a towel around it and get that guy in soon as hes back.

thats a world of pain if you start playing.
infact i don't even know what that pushfit is!!!
 
infact i don't even know what that pushfit is!!!

It looks like DM to me. Normally only seen on flexi tap conns.

Agree with Killy Bing above - if there is a guy who is used to it, then get him in ASAP.
 
Did you fill in and send off you Lifetime Guarantee when you purchased the column? If you did then Kohler should call and fix it for free. If they can't repair it they should replace it with the new style column.
The push fit connections are the old style John Guest 10mm fittings. The new style are a lot bulkier so sometimes not enough room to fit them but you can remove the O rings from the new fittings and use them in the old fittings. Daryl never used pipe inserts as this reduces the flow too much.
The part that is broken is known as a spline connector and I believe they still have them in stock. Ring them again and ask them, best to replace all three (temp, flow and diverter) at the same time. If you dont have any luck PM me and I will see if I have one, they sent me a few years ago and I probably still have them.
Hope that helps.
 
Status
Not open for further replies.

Reply to Kohler daryl shower temperature mixer broken in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

My parents are having a great deal of trouble with their Daryl Hydra shower due to this little plastic part being broken. It's the temperature...
Replies
3
Views
686
I need to find a plastic temperature spline Daryl or Kohler 204292 or equivalent. It seems that part is discontinued but I'm loathe to replace a...
Replies
18
Views
2K
Hi - hope you can help. The on/off tap (part number 204543) on my Daryl Hydra classic shower has broken inside. I spoke to Kohler UK but they...
Replies
7
Views
2K
Hi - I hope you can help. We have a discontinued Daryl Shower - the Daryl Hydra 400 that is integrated into the Daryl shower cubicle (at least I...
Replies
3
Views
4K
Hello - am hoping someone out there can offer some advice... I've been living in a split level 1st & 2nd floor masionette for two months, which...
Replies
6
Views
4K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock