Search the forum,

Discuss Worcester Heatslave 12/14 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

colin2907

I have a Worcester Heatslave 12/14 boiler. For the first time ever I have run out of oil and it has locked out. I am awaiting a delivery of fuel but suspect that I am likely to have a problem restarting due to the possibility of air in the system. Could anyone give me a Dummies Guide on how to bleed the system and any other action I should take. Please bear in mind that I am a novice at this!
 
Thanks WHPES and Bunker. I decided to take your advice rather than risk messing things up myself. Engineer due on Friday!
 
That's a poor wait for somebody without heating and hot water.
 
Hi seems were getting black smoke out of the outlet everthing seems sooted up
 
Status
Not open for further replies.

Reply to Worcester Heatslave 12/14 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
156
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
363
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
496
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
150
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
280
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock