washing machine - hot/cold pipes

[Nornenschwester]

Hello! Sorry for the silly question upfront, but i got no idea what i'm doing :lol:]. I got a washing machine recently and now i got the problem that there's no way of telling which one is the cold water supply as the machine only needs cold water. The pipes are not marked with blue or red so my question is, is there any other way of telling which one is which? (Picture attached if that's any help?)

Thanks a lot for any help!

 

[Old Account]

Hello there,

Try open up each isolation valve but make sure you have something to catch the water like a bucket or bin bag without holes

You will literally see which is hot or cold.
But do only the job if you feel comfy enough.

 

[Old Account]

If you do not know to open those valves then take a little adjustable spanner or a grip and open those brass coloured ... Just open it slightly so should feel straight away what is hot and cold.

 

[Nornenschwester]

Thanks a lot! I will try this and let you know how it went. Wish me luck i don't drown the kitchen :lol:

 

[Old Account]

You won't drown just open it slightly you will see it's pretty simple just make sure to catch the water.

 

[ShaunCorbs]

im going for right as cold left as hot

 

[plumben]

Usually the cold will be on the bottom or hot on the left depending on the orientation and who fitted them,

But as said open up one valve and you will feel if the water or pipe becomes warm, you may need to run a bit of water off before it becomes hot

 

[stevetheplumber]

if you put the new hose onto one of the valves and run it into a bucket it will be easier

 

[Nornenschwester]

Thanks a lot, I will try it tomorrow, should work out fine
I see the pipes underneath the sink which are marked red and blue, but the pipes run behind the cupboards (attic type of flat) so i can't see which one is which and my labdlord has no idea either^^
So i'll open the valves slightly and have a look, thanks!

 

[newcastle phill]

Im gonna say cold is left hot is right [emoji12]