Discuss tundish leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

alex679

hello everyone, went to a mates house where his tundish was leaking, checked discharge pipe for blockage but was ok. I was thinkinh the expansion vessel needed pumping up or could be full of water, if that fails what else should i go to?new prv or pressure reducing valve cracked/faulty.

not the best on unvented so any help will be appreiciated, thanks guys.
 
check exp vessel pressure, prv valve, tprv valve, make sure system is not overheating, check pressure reducing valve is working correctly.

do you have your unvented ticket?
 
Status
Not open for further replies.

Reply to tundish leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Good evening, I'd like your opinion on something that is worrying me please: my landlady's plumber replaced the bottom/night element of my...
Replies
2
Views
492
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and...
Replies
2
Views
524
losing pressure
L
Good afternoon, I am experiencing a pressure issue with my heating system and was hoping to receive additional insight as to what the problem...
Replies
9
Views
410
P
Hi, complete novice here. The other day we noticed a brown stain on the kitchen ceiling. We have an unvented hot water cylinder in the airing...
Replies
3
Views
1K
Oil boiler (now~15 years old) unvented system with 17 radiators. We moved in 5 years ago and I had to keep bleeding the same radiator. The bleed...
Replies
1
Views
287

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock