trying to change mixer tap rising spindle??

[Frenchy316]

Hi guys. I had a job today where had to change the rising spindle on the hot tap of a bath mixer, the only problem being the screw that holds the tap head on is rounded off! I tried unscrewing the chrome body of the tap and attempting to get a set of pliers or adjustable on the thread but theres not enough clearance! Is there any way I can get the spindle off and not having to replace the whole mixer tap? Many thanks

 

[Best]

If the screw is in from the top of the head, then you need to get it out. Either try to get a screwdriver that fits it (could try the trick of using a medium slotted screwdriver & knock the edge of the screw to slacken with a hammer) or just drill the screw head off.
An open spanner exact size may fit below cover to remove spindle or a thin adjustable.