Search the forum,

Trevi Therm dripiping

Post new thread

Discuss Trevi Therm dripiping in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jacksy

Hi all
i have trevi therm shower and it has started to constantly drip from the shower head..turning the hot handle does not seem to stop it..any ideas on what may be the cause please
 
Last edited by a moderator:
Welcome to the forum jacksy, any idea how old it is?
 
rpm said:
Welcome to the forum jacksy, any idea how old it is?
Click to expand...

cheers rpm
6 or 7 years old..i have taken it apart and one of the gears(left one) is jammed..i have no idea how to un-jam it..i have sprayed it with WD40 and it still wont turn
 
rpm said:
Welcome to the forum jacksy, any idea how old it is?
Click to expand...

cheers rpm
6 or 7 years old..i have taken it apart and one of the gears(left one) is jammed..i have no idea how to un-jam it..i have sprayed it with WD40 and it still wont turn
 
done quite a few of these, each case new shower unfortunatly.
the shower valve cartrige is upwards of £120+ just for the thermo side.
ebay whole valve around £180-220!!
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Trevi Therm dripiping in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
292
John.g
J
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
exedon2
exedon2
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
340
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbers' Talk
Tiling Forum
Electrical Blog
Tilers' Talk
Contractor Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock