Search the forum,

Discuss Training as a Plumber, looking for hands on part time work. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

ChrisN

Trainee plumber looking for hands on work
Messages
16
Hi guys and thank you for taking the time to read this.

I am currently working through a at home course compete with practical training at a centre. I have my Level 2 Diploma in Plumbing studies and have so far completed 32 modules of the course which is 42 modules in total. I am waiting for the tutors to mark my work so i can get the next book and continue.

I have taken to my training well and successfully completed my first 2 weeks training 2 days early so i have completed some of the other weeks training which will mean those weeks will be easier to finish.

I am firstly looking for part time work for now until i finish training to replace my current part time job as a chauffeur so i can learn on the job as well as in college. Moving eventually to a full time job once i can earn enough to support my family and my wife return to part time work.

I live in the Hertfordshire area, so if you would like to consider me please message me so we can discuss details further.

Many Thanks

Chris Nation
 
Also interested in shadowing someone to get a little on the job experience. Think of me as a free helper for a day.
 

Reply to Training as a Plumber, looking for hands on part time work. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
319
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
109
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
437
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
118
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
120
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock