D
Dava811
So I got a call from a friend this afternoon to see it I cud go over to his house to fix his boiler which I have done a few times, and here's the problem.
It's an rdb oil burner, he ran out of oil, he topped it up with 300 litres, so I bled it, he has a tiger loop which was empty of oil. The level of the oil in the tank is about even with the level of the burner. I got the tiger loop filled again about a 1/4 the way, not sure how much oil is meant to be in it.
Eventually I got it firing up but the flame seems to die off after a few seconds and cuts out then ignites and that cycle continues over and over again.
The flame slowly dies off as if the oil stops flowing to the nozzle. the burner has been bled properly.
please help me out, I'm lost.
It's an rdb oil burner, he ran out of oil, he topped it up with 300 litres, so I bled it, he has a tiger loop which was empty of oil. The level of the oil in the tank is about even with the level of the burner. I got the tiger loop filled again about a 1/4 the way, not sure how much oil is meant to be in it.
Eventually I got it firing up but the flame seems to die off after a few seconds and cuts out then ignites and that cycle continues over and over again.
The flame slowly dies off as if the oil stops flowing to the nozzle. the burner has been bled properly.
please help me out, I'm lost.