I'm looking for some advice on a frustrating problem I'm having with my old Eurostar 50-60s oil boiler please? Although it's old, most parts needed to operate it are now new.
The symptoms indicated a broken/seized burner motor or oil pump. I wrongly assumed the motor so I ordered a new one only...
I have a customers trianco burner that starts from cold ok for a few minutes (say 3minutes) then locks out then will not stay on.
Boiler had not been serviced in a long time and oil filters were bunged up as was the nozzle.
I decided to service it with hopes it was simple starving of fuel from...
Hi, I am trying to service a Trianco Eurostar 70/90 oil boiler but I just can not get the bayonet fitting blast tube to turn and release to gain access to the nozzle and electrodes. I have tried using Penetrating oil and a oil filter wrench to turn it, I have tried some heat and some tapping but...
Hello everyone, I am looking for some help with this boiler. This problem has only just started in the last few weeks and only happens when it has been a long time (5/6 hours) between timer on settings and when it has been cold.
Common time is at 06.00 when timer is set to come on for the...
I have here a Trianco TRO 15/19 boiler and on inspection it has no baffle plates, just the flimsy flue baffle box. Without any plates the flue temperature is off the scale!
Did Trianco make the boiler (I think it must be a Mk.1 TRO 15/90) without baffle plates?
I have an old but good Trianco EuroStar 50-60 (S) oil fired boiler with a Riello RBL G5 BF burner which has been well maintained and regularly serviced by me. I am not a professional but have a reasonably good working knowledge of the boiler and acces to a Brigon test kit.
I am recently finding...
Hi to everyone. I am a DIY plumber up to a point having been an electrician in the Navy. I will tackle most problems but know my limitations as regards plumbing. But having bought an old house and renovated it try and research a problem and then decide if its for me alone. Thanks
I have a TRG...
hi guys, I removed a burner from the trianco tro it had 2 screws below the burner to keep it fitted. It had a danfoss pump on the right hand side face on and the control box on the left face, the blast tube above is a case that's opens up and the fan is in side. The fan adjustment is by a flat...
Morning all,
Can anyone shed some light on said boiler? It’s going off on unexpectedly. This is only the second time it’s done so in 3 weeks, boiler doesn’t go in to lockout. The first time was just after having heating oil tank topped up, but far as I can see oil is flowing freely to pump. The...
hi guys, I've got a customer who is having problems with there boiler.
The symptoms so far the boiler isn't coming Through the programmer. The electrics are all good so it's not that. the customer is having to press the button to start the boiler.
Could this be early signs of the capacitor on...
Was have a trianco trg45 boiler and one of the flueways at the back has become blocked solid. The tool provided can't shift it and it's awkward to get at. Is there a chemical or something I can use to soften up the compounded soot. Any help would be gratefully received
Hi, we're looking at buying a 1976 house with original boiler.
They say it's nevr broken down and last service cost £49 and resulted in a nozzle replaced at £16
Would appeciated any advice from the experts. Should we be worried and looking at a replacement.
If so, what cost could we expect...
Hello all. And merry Christmas to you all.
Trianco TRO 28/32 approx. 30 years old. Recent burner lock out problems identified as caused by no spark. [proved by lack of spark noise yet wet around nozzle.]
Set electrodes too close together as temporary fix. now achieving 11.9% CO2 and CO at...
I have an old but perfectly working Trianco Oil Fired Boiler. It works perfectly well but it wakes me up in the mornings when it comes on. It isn't the burner jet noise but a bearing noise from the electric pump motor.:builder:
This is a new motor (6 months) and made the noise from new. It is...
Hi Guys
I've seen a post on here regarding leaking flu seals on Trianco balanced flu causing the burner to cycle on/off. I have that problem and removing the air feed pipe solves it, the burner stays out and runs fine.
We're looking to move the boiler in a few weeks (into new extension) so don't...
Hi
Im not a plumber but need help if anyone can advise will be most grateful.
We have moved into old house and it has a trianco TSO. Has just had a 'service' and been advised it should be upgraded (tell me something I dont know!). When we first moved in all radiators worked and so did hot...
Hi
I see some of you knowledgeable people know about solid fuel boilers and hope you might be able to help me.
I hada TRG80 installed in 2014...all going well. I had to turn it off for some building work in May/June 2015.
However I am now trying to restart it and it goes out after 1-2 days...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.