Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Spare rollers for curved sliding shower doors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
I am trying to locate an outlet to purchase spare double rollers for our curved sliding shower doors. The shower cubicle doesn't have a trade name or name for the cubicle, just the codes GQB8080/ GQB9090/ GQB9076/ GQB1080/ GQB1280/ GQB1290. The wheels for the lower roller are spring loaded and are 6mm wide with a diameter of 25mm. The width of the shower door glass is 6mm and the height from the bottom of the wheel to the top of the spring is 5cm. Any ideas?
 

Reply to Spare rollers for curved sliding shower doors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I’m after some replacement roller wheels, not necessarily the whole roller units. The shower unit was made by Biava - pretty old, around 20 years...
Replies
0
Views
482
Hello, I fitted a Cooke and Lewis shower cubicle about 5-6 years ago. The weight of the glass shower door has put large impressions of the roller...
Replies
12
Views
908
I have a Neo-Angle shower tray, … imagine an oblong with corner cut at 45 degree It’s 1.2m x 0.9m The ‘Roman’ shower door has failed, the only...
Replies
3
Views
911
  • Locked
i am trying to repair friends shower cubicle , does anybody know where i can find spare wheels , it is a bi folding door
Replies
1
Views
15K
Hi, some professional advice would be greatly appreciated, We are having an Unvented Cylinder installed into our 2 bedroom ground floor flat. I...
Replies
17
Views
9K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock