Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Spare rollers for curved sliding shower doors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
I am trying to locate an outlet to purchase spare double rollers for our curved sliding shower doors. The shower cubicle doesn't have a trade name or name for the cubicle, just the codes GQB8080/ GQB9090/ GQB9076/ GQB1080/ GQB1280/ GQB1290. The wheels for the lower roller are spring loaded and are 6mm wide with a diameter of 25mm. The width of the shower door glass is 6mm and the height from the bottom of the wheel to the top of the spring is 5cm. Any ideas?
 

Reply to Spare rollers for curved sliding shower doors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
262
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
246
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
281
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
320
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
313
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock