Search the forum,

Discuss Shower pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

Old Account

Hello all ,


I had had an issue today I came across a shower pump I haven't seen before.

The Stuart turner 1.5 bar single hot water ,

located 1st floor next to the cylinder / feeds only 1 wash basin upstairs 2nd floor

customer said pump is not working anymore it used to work great then it started intermittent now it completely stopped


the Stuart turner single pump has also a Stuart turner control module installed therefore I have never seen it before and didn't really know what's the issue.

Before re I give a price to replace the pump I would like to try to find out what's the issue.

this module helps the pump from running dry and any sort of restriction it would shut the pump down straight away so the pump wouldn't get damaged.




now is your turn does anybody know what it could be ?

The module didn't show any light on those 3 lamps I assume I could do a restart but what caused the module to lock out ?



Atched you will find the module


[video]http://www.pumpserviceltd.com/stuart-turner-commercial-pumps/control-module/control-module-41011/prod_424.html[/video]
 
Sorry cant help , but stuart turner tek lads are always happy to help
 
Thank you dude , I will give it a go. I just thought someone knows the fault as well as the old pump
 
Status
Not open for further replies.

Reply to Shower pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Are specialist refurbished Stuart Turner pumps reliable, or is it a bit of a gamble. Would it be best to buy new and pay twice as much.
Replies
2
Views
177
Apprentice plumber here studying level 2 at college. Before I got into plumbing I tiled over my stopcock as I assumed I wouldn't ever use it, because all my outlets have isolation valves and I have an indirect gravity fed system in a small flat with a Stuart Turner pump (now as I learn more at...
Replies
9
Views
856
I have a negative head twin impeller Stuart Turner pump feeding hot and cold to three showers, one bath, plus hot to three basin's from my gravity fed, loft cold water tank and airing cupboard hot water tank. Occasionally the pump operates for a couple of seconds without demand for water. More...
Replies
2
Views
896
Hello! Im Martyn Im new here and have joined for some advice on a couple of things. Ive got an issue with a Mira mixer shower that has increasingly become harder to operate. The shower was installed before I moved into the house. Basically what happens is that I turn the shower on so there's...
Replies
1
Views
340
M
I have a viessman vitodens 222F combi storage boiler on the ground floor. It has 100l capacity inbuilt cylinder which is delivered on mains pressure. I bought it hoping I could have two showers across floors running with hot water even if it’s a short while, while avoiding an unvented...
Replies
0
Views
326
Max Hill
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock