Search the forum,

Replacement fitting for heating oil fuel supply

Post new thread

Discuss Replacement fitting for heating oil fuel supply in the USA area at PlumbersForums.net

R

RDarbyshire

Messages
2
View attachment 42552 I need to replace this fitting that is connected to the heating oil fuel supply to my boiler, can anyone recommend a supplier and also what what is this component known as, so that I order the correct part. TIA
 

Attachments

  • 5B389B16-2E9C-47EA-AC3B-A8C07EF6D6D2.jpeg
    5B389B16-2E9C-47EA-AC3B-A8C07EF6D6D2.jpeg
    37.3 KB · Views: 17
That's a remote sensing fire valve. A phial hangs over the burner with a capillary tube running back to the valve, when the set temperature is sensed it automatically shuts the valve and cuts off fuel supply. I would fit a Teddington KBB 65°c but you need an oil engineer, you should not try this yourself.
 

Reply to Replacement fitting for heating oil fuel supply in the USA area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
145
SnosRap75
SnosRap75
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
303
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
204
PSxxxxxx
P
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Blog
Plumbers' Talk
Tiling Advice
Electrician Talk Forum
Tilers Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock