Search the forum,

Remeha Avanta Plus 28C P5 Parameter

Post new thread

Discuss Remeha Avanta Plus 28C P5 Parameter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Neil Callaway

Gas Engineer
Messages
10
Have seen that the P5 parameter should be changed from factory setting to 1, if you are using a room thermostat with an anticipator, just wondering why it makes a difference, it can stop the E5 error appearing apparentley. Does anyone have any experience of this problem?
Just started working on a contract which has Remeha and Buderus boilers fitted.

Thanks in advance
Neil
 
Status
Not open for further replies.

Reply to Remeha Avanta Plus 28C P5 Parameter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
148
John.g
J
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
mutley racers
M
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
256
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical News
Tiling Blog
UK Tiling Forum
Electricians Talk
Tile Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock