You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
remeha
De Dietrich Remeha is one of Europe's biggest manufacturers and distributors of domestic and commercial water and space heating systems. Headquartered in Apeldoorn in the Netherlands, it was founded in July 2004 after a merger between the Dutch firm Remeha, and the French firm De Dietrich Thermique. In July 2009, the heavily laden with debt British Baxi group agreed to merge with De Dietrich Remeha, creating the BDR Thermea Group.
Advice required here please from my fellow Gas Engineers.
Been back n forth, well my Engineer has to a Broag Remeha Avanta 39c Combi Boiler.
In Central Heating Mode not able to get the Boiler to stay Fired. Goes through the sequence, then after 5 trys it hits E5. When i turn the tap on, and...
Remeha advantage plus boiler
Hi Ashley here, I have an enquiry about my Remeha advanta plus 24c boiler.
the remote timer/ thermostat unit has a clock that is not working can I get a new clock or a new control unit for it.
what are my options ?
thanks
Have a28c approx 10yrs old, vertical flue, plagued with random E5 faults. 18 months ago full service kit replacement all was good. Its now back with E5!
Only thing i could find amiss was on h3 (full load) co2 8.2, adjusted back to 8.8 andas it seemed to conk out on hot water i hope thats will...
For a couple of months now the CH side of the boiler has been leaking water. It would leak for a couple of days and stop. Very intermittent, but very annoying when we get water dripping everywhere (so the system would depressure quite significantly). I have isolated the behaviour to a valve on...
Morning all,
I’ve got a couple Quinta pro heat exchangers to change in the coming days..
Completed a few successfully before however I always, always, always find them an absolute pig to remove without beating the case up and muttering a few hundred curse words
They’re lumpy bits of kit and I...
Hi folks a customer of mine has just moved and has the above boiler installed in their new house. They want it servicing which I thought some of you may have some pointers. I have never even seen one TIA
Hi everyone
Am having challenge on REMEHA AVANTA PLUS BOILER.
When the room thermostat call for heat on rad no response but when the tap is open hot water comes out.
When the boiler is on SERVICE MODE central heating working but tap water is cold.
Please I need help on how to put things right...
Anyone any idea where I can get a fuse holder for an Avanta 18v?
It's the 2AT fuse that sits on the PCB. It's sprung and has this silly little metal hook that holds it in place once you twist it. Tiny hook snapped off so fuse wont stay in board so boiler wont run unless you hold the fuse in.
My...
Hi all - new member home owner here
My Remeha Rematic RF room stat has a failed mechanical clock. The unit still talks to my Remeha Avanta Plus 39C - manually setting it to thermostat only mode works fine but I'd like to have it on timer again too.
As it is mechanical it has always had a...
I have a Remeha Avanta boiler, which works fine, but two different gas engineers, one from Baxi and one from British Gas Services have identified that there is known problem with these boilers, in that the downpipe at the rear of the boiler (a condensate trap?) is known to become rusty, and can...
Hi there, I am after a Remeha Rematic RF thermostat and receiver. If anyone is taking one out and happens to come across one I'd be interested. Basically the clock on ours has worn out and thought I might get some luck on this forum.
Many thanks,
Dan
Hi Guys.
I wonder if you help try an settle an argument that has been rumbling on between me and my BG mate.
When the case rusts around the trap on the Remeha and there is a visible hole ID or AR.
I have rang baxi and gas safe and they say the same thing, but I'll not say just yet so it...
Hi guys looking for a bit of advise for anyone that has had similar experience. While servicing 4 remeha boilers in the one boiler house 1 of them was giving me trouble with the combustion reading. While testing at low fire the CO2 readings were as low as 1.2% but while trying to increase the...
Mate of mine has just text. I cant get there because im busy but their remeha avanta plus 24c is giving e10 code.
Started off e5. Condense was frozen.
They have bled rads said I will get up tonight is anyone familiar with whats happening?
Thanks
Hi All,
Just joined the group. GSR, hoping to make use of the vast knowledge of you guys on Remeha and Buderus boilers, just started working for a council that has loads of these fitted, until then never really come across them.
Anyone help with the common faults.
Remeha Avanta Plus 28c...
Have seen that the P5 parameter should be changed from factory setting to 1, if you are using a room thermostat with an anticipator, just wondering why it makes a difference, it can stop the E5 error appearing apparentley. Does anyone have any experience of this problem?
Just started working on...
I've been putting in some new rads on a y-plan system. Came to running the system and it was incredibly slow to heat up. At first I thought it was something i'd done but after numerous checks it became evident that it was the boiler. Flow and return gave 15.5 degree difference and flow temp...
So, six years ago, I strongarmed my Gas Safe guy into installing a Broag Remeha Avanta Plus 30S boiler. I travel a lot in northern Europe and see these things all over the place, purring away very quietly and seemingly, efficiently. Imagine my embarassment when 18 months or so into service, it...
Boiler not fireing up in morning.have changed pump and flow and return sensors on boiler , also bled system.error code 2 is showing, any help would be appreciated gaza
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.