Push fit

[Kyle87]

Who uses it and who doesn't and why?

 

[Howsie]

Like it all. Has its place. Only poly plumb for me.

 

[Meady]

I use push fit but only because I work in site and its what they specify. Would only use copper in my house.

 

[Mike Jackson]

Polyplumb if using plastic. Speedfit end caps as a temp because they are brilliant. Tectite sprint on copper where there's too much water in the pipe to solder (not often because they are expensive).

 

[Kyle87]

There's a few but not the majority on here that prefer poly plumb. Is there a major reason for this or is it just what you started out using and carried on.

 

[Howsie]

Poly plumb ain't coming off

 

[Kyle87]

Poly plumb ain't coming off

That's a good reason!

 

[tom609]

copper for me very very rarely use push fit usually socket or bend when altering existing to copper

 

[Guest123]

Copper for me too. I have absolute confidence in copper and solder especially under a floor or in a restricted access area. I only use Speedfit as a last resort and never under a floor.

Both copper and plastic have their place when installed properly.

 

[WHPES]

Copper by preference but if it has to be plastic it's Polyplumb every time