Search the forum,

Possible

Post new thread

Discuss Possible in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

Okcoky

Is it possible to use a y piece connecter from my dishwasher feed and have the other feed going to an outside tap?
 
Possible, - yes, but no point really. You need an isolating valve and a check valve on pipework to outside tap. Also better the Dishwasher has its own dedicated isolating valve.
Just tee off with a soldered or brass tee and you will have the 2 supplies
 
You don't want to do the DIY method of connecting to an outside tap with those nasty garden hose type tap kits that are sold in the big DIY sheds. Silly and risky
 
Status
Not open for further replies.

Reply to Possible in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Puppy ate my shower! Can this be fixed?
My puppy ate my shower head where it connects to the hose. It's an expensive shower head (hand held) how do I fix just that piece? Is it possible?
Replies
2
Views
162
FSTumi
F
N
Is it possible to not have a b allcock in a cold water header tank?
For reasons that I won't go into. Is it possible to control the water flow to a cold water header tank without having a ballcock in the header tank? ie to place some sort of control elsewhere in the feed pipe before the water gets to the header tank - turning off the mains water supply would...
Replies
2
Views
166
Last Plumber
Last Plumber
T
Installing a washing machine and dishwasher
Hello, I'm installing a new kitchen which will have a dishwasher and washing machine. As I'm cutting/teeing into the cold mains 15mm pipe (before the kitchen sink taps) to feed the dishwasher and washing machine is it worth fitting a isolation valve with a built-in check valve? Regards Tezzer
Replies
7
Views
577
Tezzer2022
T
L
How to turn this cap off on cold water pipe
Morning. I have a leak. It’s coming from the connector pipe….the picture shows the pipe. It is a cold water pipe going in to the back of my dishwasher. I assume the washer may need a replacement. Anyway I cannot for the life of me turn the water off I.e at this cap. I understand I should turn...
Replies
2
Views
346
Liz0800
L
DIYwilling
25mm outflow to 50mm waste pipe converter
Hi, grateful for any advice I need to connect a dishwasher waste water outflow pipe 25mm to 50mm waste pipe. Is there a joining piece anyone can recommend? Maybe with some appropriate tape. The waste pipe is in the wall but was trimmed at some point (unnecessarily) to only 10mm extruding from...
Replies
9
Views
370
DIYwilling
DIYwilling
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock